Box Version New

2022 Autel MaxiIM IM608 IMMO Keys Programming +G-BOX2+APB112 Diagnostic Scanner

2022 Autel MaxiIM IM608 IMMO Keys Programming +G-BOX2+APB112 Diagnostic Scanner
2022 Autel MaxiIM IM608 IMMO Keys Programming +G-BOX2+APB112 Diagnostic Scanner
2022 Autel MaxiIM IM608 IMMO Keys Programming +G-BOX2+APB112 Diagnostic Scanner
2022 Autel MaxiIM IM608 IMMO Keys Programming +G-BOX2+APB112 Diagnostic Scanner
2022 Autel MaxiIM IM608 IMMO Keys Programming +G-BOX2+APB112 Diagnostic Scanner
2022 Autel MaxiIM IM608 IMMO Keys Programming +G-BOX2+APB112 Diagnostic Scanner
2022 Autel MaxiIM IM608 IMMO Keys Programming +G-BOX2+APB112 Diagnostic Scanner
2022 Autel MaxiIM IM608 IMMO Keys Programming +G-BOX2+APB112 Diagnostic Scanner
2022 Autel MaxiIM IM608 IMMO Keys Programming +G-BOX2+APB112 Diagnostic Scanner
2022 Autel MaxiIM IM608 IMMO Keys Programming +G-BOX2+APB112 Diagnostic Scanner
2022 Autel MaxiIM IM608 IMMO Keys Programming +G-BOX2+APB112 Diagnostic Scanner
2022 Autel MaxiIM IM608 IMMO Keys Programming +G-BOX2+APB112 Diagnostic Scanner

2022 Autel MaxiIM IM608 IMMO Keys Programming +G-BOX2+APB112 Diagnostic Scanner    2022 Autel MaxiIM IM608 IMMO Keys Programming +G-BOX2+APB112 Diagnostic Scanner
Keys FOB PROGRAMMING FOR PROS? IM608 can perform complete IMMO & keys programming functions, like read PIN, keys learning (for BMW CAS4/3/2, for Benz FEM/BDC keys, for VW/Audi/Skoda/Seat IMMO III/IV/V keys), remote learning, keys generation, IMMO ECU reset/ adaptation/ refresh/ coding, IMMO data backup, Read & Write transpronder, Read & Write EEPROM/MCU, Read & Write Mercedes Infrared keys. With GBOX 2 accessory included, IM608 can perform advanced Mercedes All keyss Lost function. AUTEL GBOX 2 & APB112?

It works with Autel IM508/ IM608 (PRO)/ IM100/ IM600 and Autel second brand OTOFIX IM1etc. To expand the advance IMMO functions specific BEZ/BMW cars. Supports DME/DDE ISN Reading and Writing in Boot Mode on applicable BMW vehicles; Reduce the data reading time of ECU W204 and EIS W207.

ADVANCED keys PROGRAMMING, DIAGNOSTICS, SERVICES ALL-IN-ONE? Autel IM608 is state-of-the-art car keys programming tool that combines advanced IMMO/keys programming, all systems diagnostics and 31+ service functions. Supports live data, active tests, matching & adaptation, ECU coding, IM608 handles almost all everyday tasks a workshop could ever face. Supports DME/DDE ISN Reading and Writing in Boot Mode on applicable BMW vehicles; Reduce the data reading time of ECU W204 and EIS W207 by more than 85%; It is not necessary to remove and reinsert the keys for W221 and W164 after the 2009 models; It can be used in Boot Mode or Bench Method. The APB112 smart keys simulator is used to collect the data sent from the ignition coil, aiming to identify the ignition coil troubles and decode the data of the vehicle keys chip. It can also simulate the vehicle keys chip. Currently, it supports to simulate the 4D type chip. More keys chip types will be supported with future upgrades. As one of Autel's top diagnostic scan tools, IM608 has the same OE-level diagnostic and extensive service capabilities as MK908/MS908S. Eg: supports ABS auto bleeding(also for specific VAG cars), SRS Reset, DPF Regeneration, EPB, SAS Calibration, injector coding, BMS, Throttle Body, Power Balance, Turbo Acutator Calibration, Crankshaft Position Learn, etc. More powerful than MaxiSys MS906/ MaxiDAS DS808/ MaxiPro MP808, Autel IM608 features ADVANCED ECU coding(not programming) to change preprogrammed options in softwares. It helps workshops customize cars, unfold the hidden features or disable the annoying functions and do adaptation for certain components after repairs or replacements to satisfy car owners various needs. NOTE: The J-2534 included is for communication only, it can NOT program ECUs. Autel MaxiIM IM608 with XP400 & J2534 & GBOX2 & APB112.

Autel IM608 keys programmer is a state of the art 10-inch Android-based touchscreen tablet combining the most advanced keys programming and immobilizer capabilities with OE-level diagnostics and service functions. Equipped with XP400 keys programmer and MaxiFlash JVCI ECU programmer, IM608 automotive scan tool is a comprehensive immobilizer and keys programming tool. It is ideal for auto technicians and locksmiths. Upgraded verion of Autel IM508. For Mercedes Benz All keyss Lost, Faster Password Calculation.

Used for Faster Mercedes ECU data and EIS password calculation. For Mercedes DAS3 can EIS / EZS all keyss lost. Reduce time reading W204 ECU data & W207 EIS by over 85%. No need to remove and reinsert the keys for W221 & W164 after 2009 models. For BMW DME / DDE ISN reading and writing in boot mode.

G-Box is compatible with both the Autel MaxiIM IM 608 and IM508 with XP400, also compatible with Auro IM600 and Auro IM100 with XP400. 46 smart keys password calculation. Toyota 4D (94/D4, 98) smart keys simulation. Toyota H (88/A8, A9, 39) smart keys simulation.

Toyota/Lexus smart keys all keys lost. Collects data from the ignition coil.

Decode vehicle keys chip data. Simulate vehicle keys chip (ex - 4D chip). Must be used with an Autel diagnostic tool. Compatible with Autel MaxiIM IM608, IM508, and MX808IM, Auro Otosys IM100, IM600.

Compact but would need to be used with the XP400. New features in the latest version of IM608 in 2022. Autel MaxiIM IM608 car keys programming & diagnostic tool combines professional IMMO & keys programming, OE level all systems diagnostics and advanced service functions in one Android based 10.1-inch touchscreen tablet.

Autel IM608 has been greatly enhanced since 2021, XP400 no burnout anymore. What's more, Autel added many extra feature to IM608, for example as below. Adds'Programming' and'Coding' functions for IMMO related systems : DME, JBE, FRM, CAS, KOMBI, EGS, GWS, ZGW, ELV and FZD.

Adds coding SCN for IMMO related systems : DAS, ECU, TCU, ISM and ESL. Newly added features on Autel IM608. Supports New Software Version (swfl_00002419_085_010_080) for keysLearning Function for FEM/BDC Immobilizer System.

Adds 196 Software Versions, Supporting Read ISN (OBD Mode) Function forB48/B58 Engine. 2022 Latest Version XP400 Enhancements.

The XP400 is specially designed to read transponder data (including Mercedes Benz infrared smart keys), clone and generate exclusive keyss, read/write on-board EEPROM data, and read/write Freescale 9S12 MCUs. By working with diagnostic tool and PC that are both loaded with programmer software, the XP400 can read/write transponder data quickly and accurately. Read / Write transponder data, ECU/MCU/EEPROM data eg.

9S12 encryption chip, IC card, detect remote frequency. Read / Write MC9S12 Encryption Chip.

Read / Write IC Card. Read / Write ECU / MCU / EEPROM Data. Autel 2022 NEW XP400 has been greatly enhanced in both hardwares(NO misconnection burnout) and softwares for many cars. Enhanced XP400 has more functions.

For BMW: Adds'Programming' and'Coding' functions for IMMO related systems : DME, JBE, FRM, CAS, KOMBI, EGS, GWS, ZGW, ELV and FZD. For Mercedes-Benz: Adds coding SCN for IMMO related systems : DAS, ECU, TCU, ISM and ESL. Note: Functions are not universal, send VIN to us to check compatibility before order.

Autel MaxiIM IM608 MaxiFlash J-2534 ECU Reprogrammer. This multi-protocol Pass-Thru vehicle interface is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device, specially designed to provide users with convenient PC communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, and offer the most significant features desired by OEM customers: reliability, fast performance and flexibility. The Coding function is used to configure the vehicle control modules(ECUs) with extra parameters.

These functions allow you to update the computer software on the vehicle to the latest version, as well as to reprogram adaptive data for certain components after making repairs or replacements. MaxiSys is one of the very few diagnostic systems in the world with the capability of preforming safe and reliable coding and flash programming with affordable costs. Autel MaxiIM IM608 Advanced IMMO & keys Programming. Smart Mode:for Guided and Automated keys Learning. Expert Mode:for Advanced keys Learning.

Read PIN / CS (All keys Lost). Backup / Restore IMMO Data. IMMO ECU Reset / Adaptation.

IMMO ECU Refresh / Coding. BENZ 3rd Generation IMMO Add keys, All keys Lost, keys Learning.

BMW FEM / BDC keys Learning and ECU Adaptation. VW / AUDI MQB keys Learning, 48 Transponder (96-bit) Add keys, All keys Lost. A6 All keys Lost, and More. XP400 keys & Chip Programmer.

MCU / EEPROM Chips Read / Write. MC9S12 Encryption Chip Read / Write.

Mercedes Infrared keys Read / Write. ECU Coding & Full Bi-Directional Control & Auto VIN. ECU Coding : Refresh the Hidden Features/Customize the OE-settings/Match the Component Control Modules/Enhance Vehicle Performance/Renew ECU Coordination. Bi-Directional Control: Autel IM608 comes with bi-directional scan tool which allow you to request information or command a module to perform specific tests and functions, while observing the resulting data at the same time. Bidirectional Control (also referred to as Active Tests/Component Tests) function can save the mechanic/workshop loads of time and help them get through more jobs every day. Auto VIN: The MaxiIM diagnostic system features the latest VIN-based Auto VINScan function to identify vehicles and it is applied to IMMO, Programming, Diagnostic and Service applications. IMMO provides two modes: Smart Mode and Expert Mode, and only Smart Mode can be accessed by using Auto VIN function. Note: All service functions mentioned above can not work on all cars. Autel IM608 Perform 30+ Maintenance Functions [Continuously Growing With Updates]. Oil Reset: Turn off the oil light, and reset the service mileage. EPB Reset: Reset the calipers, brake discs or pads after the electronic parking brake system is repaired. BMS Reset: Reset the monitoring unit of the car battery after replacing battery or battery monitoring sensors. ABS Bleeding: Perform to bleed the brake system to restore ABS braking sensitivity and obtain a firm brake pedal. SAS Adjustment: Clear the fault steering angle sensor memories, perform reset steering angle sensor, and turn off steering wheel warning light. Throttle Relearn: Reset the throttle actuators to accurately regulate throttle (or idle engine) operations, helps keep your idling and acceleration smooth.

Airbag Repair: After replacing the Airbag, reset the Airbag data and clear the collision data. Also including TPMS Reset, Air Suspension, Gear Learning(Crankshaft Relearn), Gearbox Match, Headlight Adjustment, Window Initialization, Seat Configurations, Disable Transportation, Tire Upgrade, EEPROM, Electronic Pump Activation, Power Balance etc. Are all available and continuously growing.

NOTE: IM608 with J2534 can't do ECU Programming! If you need to do ECU Programming, please select MS908S PRO.

>> NOTE: All service functions can not work on all vehicles. IM608'S XP400 & J2534 Connection Instruction. Wireless Diagnostic: The working range for BT communication is about 210 feet (70 m).

You can perform keys programming and vehicle diagnosis on various vehicles conveniently, by pairing the tablet separately to each of the MaxiFlash. Wide Vehicle Coverage and Support multiple languages.

Support more than 80 US, Asian and European makes and models. Audi: Note: Audi software keys programming is very limited, please send VIN to check compatibility before purchasing. Seat: Alhambra, Altea, Altea, Cordoba, CupraLeon, Exeo, Ibiza, Leon, Mii, Toledo. Skoda: Citigo, Fabia India, Fabia, Kamiq, Karoq, Octavia, Rapid India, Rapid, Roomster, Superb, Yeti. VW: Amarok, Arteon, Atlas, Beetle, Bora, BoraGli, Caddy, Crafter, EOS, Fox Africa, Fox EU, Fox, GTI, Gol County, Gol(5U), Gol(5W), Golf PLUS, Golf/Rabbit(1K), Golf6 ESTATE, Jetta, Parati, Passat, Phaeton, Polo, Scirocco, Sharan, Suran, T-Roc, Tiguan, Touareg, Touran, Transporter5/Multivan, up, UP!

Fiat: 500, 500L, 500X prox, Albea, Boxer, Daily, Doblo, Doblo New, Ducato, Egea, Fiorino, Freemont, Idea, Grande punto, Jumper, Linea, Marea, Nemo, Ottimo, Palio, Palio RST, Panda, Perla, Promaster, Punto, Sinea, Stilo, Viaggio. MERCEDES-BENZ ALL keysS LOST, FASTER PASSWORD CALCULATION.

8X TIMES FASTER PASSWORD CALCULATION FOR EIS W172, W204, W207. 4X TIMES FASTER PASSWORD CALCULATION FOR EIS W209, W211, ETC. MERCEDES-BENZALL keysS LOST, NO MORE REPEATED INSERTIONS AND REMOVALS OF IR SIMULATOR. W164/-2008, W251/-2008, W164/2009-, W169, W251/2009, W216, W221(partial), W202(K)/W208(K)/W210(K), W203(K)/W463(K). MERCEDES-BENZ ALL keysS LOST, CAN BE PROGRAMMED ON THE VEHICLE WITHOUT REMOVING THE EIS. EXCEPT FOR EIS W164 / -2008, W251 / -2008, W221, W202 (K) / W208(K) /W210(K), AND W203 (K) / W463 (K), ALL OTHER EISS CAN BE PROGRAMMED ON THE VEHICLE DIRECTLY. MERCEDES-BENZ ALL keysS LOST, BMW DME / DDE ISN READING AND WRITING IN BOOT MODE.

23 CATEGORIES OF BOSCH ENGINE, INCLUDING MEVD/EDC17. 6 CATEGORIES OF SIMENS/CONTINENTAL ENGINE, INCLUDING MSD/MSV ENGINE. How does Autel G-Box Work?

OBDII Operation When All keyss of Mercedes-Benz Vehicle Are Lost. (This method is suitable for Mercedes-Benz W204, W207, W216 and W164 EISs after the year 2009).

Connect the G-Box to vehicles's OBDII. Remove the fuse of vehicle EIS, Connect the Relay ports to the fuse using the supplied fuse cable. When the vehicle has an ELV, connect the K7 port and ELV plug using the supplied K-line cable. Connect the G-Box to the Autel Diagnostic Tablet. Desktop Operation When All keyss of Mercedes-Benz Vehicle are Lost. This Method is suitable for all Mercedes-Benz EISs that are already supported by Autel Diagnostic Tablet. Connect the G-Box to the Mercedes-Benz EIS using the supplied DB15 Cable.

Connect to the DC port of G-Box using a power adapter (DV 12V). Autel G Box Package Content. 1pc x Autel G-BOX Accessory Tool. 1pc x OBDII Extension Cable. How does Autel APB112 Work?

The APB112 Smart keys Simulator needs to be used together with the Autel Diagnostic Device. Do Not disconnect the USB Cable when in use. If you try to use the Autel G-box with IM508, you need to have the XP400. Otherwise the Autel G-Box can not work with IM508. Before operating or maintaining on this unit, please read the instruction carefully, pay extra attention to safety warnings and precautions.

Connect the APB112 smart keys simulator to Autel Diagnostic Device with the supplied USD cable. Complete the connection, status indicator lights solid blue, indicating that the APB112 smart keys simulator is working properly.

Then it will communicate with the diagnostic device automatically. According to the selected vehicle system function, the APB112 smart keys simulator application is automatically upgraded on the Autel diagnostic device. In order to decode the chip, please place the smart keys simulator close to the ignition coil for data collection.

After decoding, the original car chip data can be copied. The emulator keys chip can generate various types of keys chips by performing subsequent upgrades as needed. 1 x APB112 Smart keys Simulator. 1 x Quick Reference Guide. AndroidT 4.4.2, KitKat.

Samsung Exynos hexa-core Processor (1.3GHz Quad-core ARM Cortex-A7 + 1.7GHz Dual-core ARM Cortex-A15). 2GB RAM & 64GB On-board Memory. 10.1-inch LED capacitive touch screen with 1920x1200 resolution.

Wi-Fi (802.11 a/b/g/n/ac), USB: 2.0, BT v. 2.1 + EDR, SD Card (Support up to 32GB), HDMI. Gravity Accelerometer, Ambient Light Sensor (ALS). Microphone, Single Speakers, 3-Band 3.5 mm stereo/standard headset j.

15000 mAh 3.8 V lithium-polymer battery Charging via 12 V AC/DC power supply with the temperature between 0°C and 45°C. 0 to 50°C (32 to 122°F). 20 to 60°C (-4 to 140°F).

300 mm (11.81") x 220 mm (8.66") x 50 mm (1.97). NW: 1.42 kg 3.13 lb. , GW: 8.655 kg 19.08 lb. ISO 9142-2, ISO 14230-2, ISO 15765-4, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850 PWM, CAN ISO 11898, Highspeed, Middlespeed, Lowspeed and Singlewire CAN, GM UART, UART Echo Byte Protocol, Honda Diag-H Protocol, TP 2.0, TP 1.6, SAE J1939, SAE J1708, Fault-Tolerant CAN.

This item is in the category "Vehicle Parts & Accessories\Garage Equipment & Tools\Diagnostic Equipment & Tools\Code Readers & Scanners". The seller is "fixtoper" and is located in this country: GB. This item can be shipped to North, South, or Latin America, Australia.

  • Warranty: 12-Month
  • Language 1: English German French Italian Spanish Portuguese
  • Camera (rear): Rear-facing, 5.0 Mexgapixel, AF with Flashlight
  • Language 2: Polish, Chinese, Japanese, Dutch, Russian
  • Vehicle Type: Passenger Vehicle
  • Manufacturer Part Number: MaxiSys ULTRA MaxiCom 908P Elite IM508 IM608 MS908S MS906BT
  • Update: One Year Free Update
  • Brand: Autel
  • Supported System: ABS, DPF, EPB, SAS, SRS, TPMS, IMMO
  • Accessories: Adapter Cable, Carrying Case, USB Cable, User Guide
  • Type: Auto Diagnostic Tool Professional Scanner
  • Unit Type: 2021 Latest Version
  • Model: MaxiIM IM608
  • Connectivity: Bluetooth
  • OBD Interface: CAN, EOBD, OBD, OBDII
  • Features: Backlit Display, Built-In Battery, Check Engine Light Shut Off, Colour Display, Erases Codes, Freeze Frame Displays, Internet Updateable, LCD Display, Multi-Language Interface, User Friendly
  • Sensors: Gravity Accelerometer, Ambient Light Sensor (ALS)
  • Compatibility: OBD2 OBD1 EOBD JOBD OBDII
  • Unit Quantity: 1
  • Vehicle Coverage: GM,Chrysler,Honda,Benz,BMW,VW,Nissan,Audi etc.
  • Display: 10.1 inch


2022 Autel MaxiIM IM608 IMMO Keys Programming +G-BOX2+APB112 Diagnostic Scanner    2022 Autel MaxiIM IM608 IMMO Keys Programming +G-BOX2+APB112 Diagnostic Scanner