Axle Joost Electronic Box Version D Controls All Important Functions on the Bike. The description of this item has been automatically translated. Electronic box version D This electronics box controls the most important functions on the motorcycle. The following options are possible: - Integrated flasher relay, controllable via buttons or switches - Output for flashing control available - 2 inputs for side stand and neutral switch are implemented - Adjustable turn signal reset and position light function of the turn signals (position light) - Control of high and low beam via button or switch - Control of the horn via button - Brake light control - Control LEDs at the outputs for easier monitoring of the functions - Cable reduction in the handlebars possible via an optionally available handlebar adapter in button mode.
Incidentally, the new D-Box can also be controlled with just 2 buttons. Therefore, no key combinations have to be memorized by the user: - Briefly pressing one of the two buttons switches on the respective indicator. Another short press on one of the two buttons switches it off again. A slightly longer press and hold over approx.
0.3 seconds left switches the horn. 0.3 seconds right switches the starter.
Two short presses on the left toggle between high and low beam. Two short button presses on the right turn the ignition on - or off.
Briefly pressing both buttons at the same time switches on the hazard warning flasher function. The individual outputs are, of course, short-circuit-proof and reset themselves after a short-circuit. The D-Box can also be used for Harley Davidson motorcycles with a TSM/TSSM module to control the TSM/TSSM module. A combination with the existing alarm system is thus easily possible.
Dimensions: - Length 50mm x Width 12.5mm x Height 42mm - Current consumption: Maximum 7mA at 12V - Housing: black impact-resistant ABS plastic, watertight cast - Input voltage: 6 - 18 volts Connections: - Control part 0.14 mm², power part 0.75 mm², 1.5 mm² for supply line, each 20 cm - Maximum output current: 5 amps per output, current limit at 10 amps - Maximum ambient temperature: 80 degrees Celsius - Permissible current from the 12V connection: 20 amps. Adjustable turn signal reset and position light function of the turn signals (position light) - Cable reduction in the handlebars possible via an optionally available handlebar adapter in button mode.
The D-Box can also be used for Harley Davidson motorcycles with a TSM/TSSM module to control the TSM/TSSM modu.